Lehrstuhl Werkstoffkunde und Technologie der Metalle
UniversitÄt Erlangen-NÜrnberg
Prof. Dr.-Ing. habil. Carolin KÖrner

Englisch Flag
menuekopf menuefuss
Bild Vorname Nachname
  • Prof. Dr.-Ing. habil. Carolin Koerner

  • Lehrstuhlleiterin WTM

  • Gruppenleiterin - Leichtbauwerkstoffe

  • Raum : 215
  • Telefon : +49 (0)9131 85-27528
  • Telefax : +49 (0)9131 85-27515

Veröffentlichungen

 

M. Ramsperger, L. Mujica Roncery, I. Lopez-Galilea, R. F. Singer, W. Theisen, C. Koerner, "Solution heat treatment of the single crystal nickel-base superalloy CMSX-4 fabricated by selective electron beam melting", advanced Engineering Material (2015)

 

H. E. Helmer, C. Koerner, R. F. Singer, "Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure", J. Mater. Res., 29 (17), (2014) 1987-1996

 

A. Inayat, J. Schwerdtfeger, H. Freund, C. Koerner, R. F. Singer, W. Schwieger, "Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing", Chem. Eng. Sci., 66 (2011) 2758-2763

 

M. Klumpp, A. Inayat, J. Schwerdtfeger, C. Koerner, R. F. Singer, H. Freund, W. Schwiegera, "Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior", Chemical Engineering Journal 242 (2014) 364-378

 

M. Schwankl, M. Ruebner, M. Floessel, S. Gebhardt, A. Michaelis, R. F. Singer, C. Koerner, "Active functionality of piezoceramic modules integrated in aluminumhigh pressure die castings", Sensors and Actuators A 207 (2014) 84-90

 

T. Scharowsky, F. Osmanlic, R. F. Singer, C. Koerner, "Melt pool dynamics during selective electron beam melting", Appl Phys A. Material science and processing, 114 (4) (2014) 1303-1307

 

M. Schwankl, R. Kellner, R. F. Singer, C. Koerner, "The influence of sandblasting on the morphology of electroless deposited zinclayers on aluminum sheets", Applied Surface Science 283 (2013) 202-208

 

M. Schwankl, M. Ruebner, R. F. Singer, C. Koerner, "Integration of PZT-ceramic modules using hybrid structures in high pressure die casting", Procedia Materials Science 2, 2013,166-172

 

A. Klassen, M. Ruebner, J. Ilg, S. J. Rupitsch, R. Lerch, R. F. Singer, C. Koerner, "Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings", Smart Materials and Structures 21, 2012, 115014 (11pp)

 

A. Klassen, M. Ruebner, J. Ilg, S. J. Rupitsch, R. Lerch, C. Koerner, R. F. Singer, "Integration of piezoceramic sensors and actuators into structural components via high pressure die casting", R. Neugebauer (Eds.), Integration of Active Functions into Structural Components, Proceedings of the 3rd Scientific Symposium of the CRC/Transregio 39, Chemnitz 2011, 45-50

 

J. Schwerdtfeger, R. F. Singer, C. Koerner, "In situ flaw detection by IR-imaging during electron beam melting", Rapid Prototyping Journal 18 (2012) 259-263

 

J. Schwerdtfeger, F. Schury, M. Stingl, F. Wein, R. F. Singer, C. Koerner, "Mechanical characterisation of a periodic auxetic structure produced by SEBM", Physica Status Solidi (B) Basic Research, (2011) Online

 

T. Knorr, P. Heinl, J. Schwerdtfeger, C. Koerner, R. F. Singer, B. J. M. Etzold, "Process specific catalyst supports - selective electron beam melted cellular metal structures coated with microporous carbon", Chemical Engineering Journal 181-182 (2012) 725-733

 

M. Ruebner, A. Klassen, C. Koerner, R. F. Singer, J. Ilg, S. J. Rupitsch, R. Lerch, "Duennwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung", In: Wiehlage, B. (Hrsg.): Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 2011, 277-282

 

M. Ruebner, M. Guenzl, C. Koerner, R. F. Singer, "Aluminium-aluminium compound fabrication by high pressure die casting", Materials Science and Engineering A, 528 (2011) 7024-7029

 

H. Mitschke, J. Schwerdtfeger, F. Schury, M. Stingl, C. Koerner, R. F. Singer, V. Robins, K. Mecke, G. E. Schroeder-Turk, "Finding auxetic frameworks in periodic tessellations", Advanced Materials, 23 (2011) 2669-2674

 

J. Schwerdtfeger, F. Wein, G. Leugering, R. F. Singer, C. Koerner, M. Stingl, F. Schury, "Design of auxetic structures via mathematical optimization", Advanced Materials, 23 (2011) 2650-2654

 

A. Inayat, J. Schwerdtfeger, H. Freund, C. Koerner, R. F. Singer, W. Schwieger, "Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing", Chemical Engineering Science, 66 (12)(2011) 2758-2763

 

J. Schwerdtfeger, P. Heinl, R. F. Singer, C. Koerner, "Selective Electron Beam Melting: A New Way to Auxetic Cellular Structures", In: Proceedings of 20th Solid Freeform Fabrication Symposium, Austin (Texas), USA (2009)

 

J. Schwerdtfeger, P. Heinl, R. F. Singer, C. Koerner, "Auxetic Cellular Structures through Selective Electron-Beam Melting", Physica status solidi B: Basic Solid State Physics 247 (2010), 269-272

 

S. Ponader, C. Von Wilmowsky, M. Widenmayer, R. Lutz, P. Heinl, C. Koerner, R. F. Singer, E. Nkenke, F. W. Neukam, K. A. Schlegel, "In vivo performance of selective electron beam-melted Ti-6Al-4V structures", Journal of Biomedical Materials Research - Part A, 92 (2010), 56-62

 

M. Ruebner, C. Koerner, R. F. Singer, "Integration piezokeramischer Module in duennwandige Aluminiumbauteile mittels Druckguss", R. Neugebauer (Eds.), Grossserienfaehige Produktionstechnologien fuer leichtmetall- und faserverbundbasierte Komponenten mit integrierten Piezosensoren und -aktoren, Tagungsband zum 2. wissenschaftlichen Symposium des SFB/TR 39, Dresden 2009, 71-76

 

M. Ruebner, C. Koerner, R. F. Singer, "Die Castings with Integrated PZT-Modules - Fabrication and Functionalities", Tagungsband IV ECCOMAS Thematic Conference on Smart Structures and Materials, Porto, Portugal, 13.-15. Juli 2009

 

M. Hirschmann, H. Wiehler, C. Koerner, R. F. Singer, "Light metal integral foam - a promising material for structural applications", G. Stephani, B. Kieback (Eds.), CELLMET 2005, Proceedings of the International Symposium on Cellular metals for Structural and Functional Applications 2005, Dresden, 2005, 147-154

 

V. Braeutigam, P. Wierach, C. Koerner, R. F. Singer, "Integration of piezoceramic modules in die castings - a new production technology", 10th Adaptronic Congress, 3.-4. Mai, Goettigen, 2006

 

P. Heinl, C. Koerner, R. F. Singer, "Mechanically Adapted Cellular Titanium for Bone Substitution", G. Stephani, B. Kieback (Eds.), Cellmet 2008, Proceedings of the International Symposium on Cellular Metals for Structural and Functional Applications 2008, Fraunhofer IFAM, Dresden, 2009, 69-74

 

P. Heinl, C. Koerner, R. F. Singer, "Selective electron beam melting of cellular titanium: mechanical properties", In: Advanced Engineering Materials 10 (2008) 882-888

 

A. Ibrahim, C. Koerner, R. F. Singer, "The Effect of TiH2 particle size on the morphology of Al-foam produced by PM process", In: Advanced Engineering Materials 10 (2008) 845-848

 

A. Trepper, C. Koerner, R. F. Singer, "Reduced Structure Borne Sound of Integral Foam Components", J. Hirsch, B. Skrotzki, G. Gottstein (Eds.), Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys 2008, Wiley-VCH Weinheim, 2008, 2193-2199

 

M. Ruebner, C. Koerner, R. F. Singer, "Integration of Piezoceramic Modules into Die Castings - Procedure and Functionalities", In: Advances in Science and Technology 56 (2008) 170-175

 

P. Heinl u. C. Koerner, R. F. Singer, "Selective Electron Beam Melting - A Novel Generative Manufacturing Technique for Cellular Titanium", L. P. Lefebvre, J. Banhart, D. C. Dunand (Eds.), MetFoam 2007: Porous Metals and Metallic Foams, Lancaster, DEStech Publications, 2008, 275-278

 

A. Trepper, C. Koerner, R. F. Singer, "Structural Damping of Integral Foam Components", L. P. Lefebvre, J. Banhart, D. C. Dunand (Eds.), MetFoam 2007: Porous Metals and Metallic Foams, Lancaster, DEStech Publications, 2008, 43-46

 

H. Wiehler, P. Heinl, C. Koerner, R. F. Singer, "High Pressure Integral Foam Moulding of Aluminium", L. P. Lefebvre, J. Banhart, D. C. Dunand (Eds.), MetFoam 2007: Porous Metals and Metallic Foams, Lancaster, DEStech Publications, 2008, 15-18

 

P. Heinl, L. Mueller, C. Koerner, R. F. Singer, F. A. Mueller, "Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting", In: Acta Biomaterialia 4 (2008) 1536-1544

 

S. Ponader, E. Vairaktaris, P. Heinl, C. V. Wilmowsky, A. Rottmair, C. Koerner, R. F. Singer, S. Holst, K. A. Schlegel, F. W. Neukam, E. Nkenke, "Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts", In: Journal of Biomedical Materials Research - Part A 84 (2008) 1111-1119

 

H. Wiehler, C. Koerner, R. F. Singer, "High Pressure Integral Foam Moulding of Aluminium - Process Technology", In: Advanced Engineering Materials 10 (2008) 171-178

 

V. Braeutigam, C. Koerner, R. F. Singer, M Kaltenbacher, M. Meiler, R. Lerch, "Smart Structural Components by Integration of Sensor/Actuator-Modules in Die Castings", In: Proceedings of SPIE Vol. 6527, 65270S, Hrsg. v. L. Porter Davis, B. K. Henderson, M. Brett McMickell, San Diego 2007

 

V. Braeutigam, M. Ruebner, C. Koerner, R. F. Singer, "Druckgiesstechnische Integration von piezokeramischen Modulen in Aluminiumbauteile", In: Tagungsband zum 1. Wissenschaftlichen Kolloquium des SFB/Transregio PT-PIESA. Hrsg. v. R. Neugebauer, Chemnitz 2007, 51-56

 

P. Heinl, A. Rottmair, C. Koerner, R. F. Singer, "Cellular Titanium by Selective Electron Beam Melting", Advanced Engineering Materials 9 (2007) 360-364

 

M. Hirschmann, C. Koerner, R. F. Singer, "Integral foam molding - a new process for foamed magnesium castings", Materials Science Forum Vols. 539-543 (2007) 1827-1832

 

C. Koerner, M. Hirschmann, H. Wiehler, A. Trepper, R. F. Singer, "Integralschaumgiessen von Leichtmetallen", M. Geiger, R. F. Singer (Eds.), Robuste, verkuerzte Prozessketten fuer flaechige Leichtbauteile, Meisenbach Verlag, Bamberg, 2006, 65-74

 

V. Braeutigam, P. Wierach, C. Koerner, R. F. Singer, "Integration of piezoceramic modules in die castings - a new production technology", Adaptronic Congress, Goettingen, 2006

 

V. Braeutigam, T. Schellack, C. Koerner, R. F. Singer, "Optimized Fixing Technique for the Integration of Piezoceramic Modules in Die Castings", Giessereiforschung 58 Nr. 1 (2006)

 

C. Koerner, M. Thies, R. F. Singer, "Modeling of metal foaming with Lattice Boltzmann automata", Advanced Engineering Materials 4 (2002) 765-769

 

M. Hirschmann, C. Koerner, R. F. Singer, "Integralschaeume aus Magnesiumlegierungen", Giessereiforschung 57 Nr. 2 (2005) 8-14

 

V. Braeutigam, C. Koerner, R. F. Singer, "Herstellungsverfahren fuer druckgegossene multifunktionale Verbundbauteile", Giesserei 92 (06/2005) 46-49

 

C. Koerner, M. Arnold, R. F. Singer, "Metal Foam Stabilization by Oxide Network Particles", Materials Science and Engineering A Volume 396, Issue 1-2, 15 April 2005, Pages 28-40

 

C. Koerner, M. Hirschmann, V. Braeutigam, R. F. Singer, "Endogenous Particle Stabilization During Magnesium Integral Foam Produktion", Advanced Engineering Materials 6 (2004) 385-390

 

M. Hirschmann, M. Lamm, C. Koerner, R. F. Singer, "Magnesium Integral Foams - Production and Properties", K. U. Kainer (Ed.), Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Weinheim, Wiley-VCH Verlag, 2004, 354-359

 

M. Brunnbauer, M. Hirschmann, C. Koerner, R. F. Singer, "Giesstechnische Herstellung von Leichtmetallbauteilen mit zellularem Kern", M. Geiger, G. W. Ehrenstein (Eds.), Robuste, verkuerzte Prozessketten fuer flaechige Leichtbauteile, Bamberg, Meisenbach-Verlag, 2003, 57-69

 

M. Brunnbauer, C. Koerner, R. F. Singer, "Encasing of aluminium foam with magnesium by die casting", J. Banhart, N. A. Fleck (Eds.), Cellular Metals and Metal Foaming Technology, Berlin, MIT Verlag, 2003, 187-190

 

M. Arnold, C. Koerner, R. F. Singer, "PM aluminium foams: Stabilizing mechanisms and optimization", J. Banhart, N. A. Fleck (Eds.), Cellular Metals and Metal Foaming Technology, Berlin, MIT Verlag, 2003, 71-76

 

C. Koerner, M. Hirschmann, M. Lamm, R. F. Singer, "Magnesium integral foams", J. Banhart, N. A. Fleck (Eds.), Cellular Metals and Metal Foaming Technology, Berlin, MIT Verlag, 2003, 209-214

 

R. F. Singer, C. Koerner, S. M. Rosiwal, "From New Materials to Finished Components - Metals Research at the WTM institute of the University of Erlangen-Nuernberg", Maschinenbau in Bayern, 2003

 

M. Eitschberger, C. Koerner. R. F. Singer, "Schleudergiessen von Metall-Keramik-Verbundwerkstoffen bei hohen Drehzahlen und Temperaturen", DGM-Tagung Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 2001, 114-120

 

C. Koerner, M. Ottmueller, R. F. Singer, N. Popovska, S. Schmidt, H. Gerhard, "Optimierung von Kohlenstofflangfaser/AZ91 Verbunden durch eine pyroC/TiN-Doppelbeschichtung", DGM-Tagung Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 2001, 121-126

 

C. Koerner, M. Thies, M. Arnold, R. F. Singer, "Modeling of metal foaming by in-situ gas formation", Metal foams and Porous Metal Structures, Bremen, MIT Verlag 93-96

 

O. B. Olurin, M. Arnold, C. Koerner. R. F. Singer, "The investigation of morphometric parameters of aluminium foams using micro-computed tomography", Materials Science and Engineering A328 (2002), 334-343

 

C. Koerner, F. Heinrich, R. F. Singer, "Encasing by Casting", H.-P. Degischer, B. Kriszt (Eds.), Handbook of Cellular Metals, Wiley-VCH, Muenchen, 2002, 103-113

 

C. Koerner, R. F. Singer, "The Physics of Foaming: Structure Formation and Stability", H.-P. Degischer, B. Kriszt (Eds.), Handbook of Cellular Metals, Wiley-VCH, Muenchen, 2002, 33-43

 

C. Koerner, R. F. Singer, "Foaming Processes for Aluminum", H.-P. Degischer, B. Kriszt (Eds.), Handbook of Cellular Metals, Wiley-VCH, Muenchen, 2002, 8-14

 

C. Koerner, F. Berger, M. Arnold, C Stadelmann, R. F. Singer, "Influence of processing conditions on morphology of metal foams produced from metal powder", Materials Science and Technology 16 (2000) 781-784

 

F. Heinrich, C. Koerner, R. F. Singer, "Herstellung flaechiger Leichtbauteile durch Umgiessen von Aluminium-Schaeumen im Druckgiessverfahren", Material-Wissenschaften und Werkstofftechnik 32 (2000) 428-431

 

C. Koerner, W. Schaeff, M. Ottmueller, R. F. Singer, "Carbon Long Fiber Reinforced Magnesium Alloys", Advanced Engineering Materials 2 (6) (2000) 327-337

 

M. Ottmueller, C. Koerner, R. F. Singer, "Influence of the Fiber-Matrix Interface on the Strength of Unidirectional Carbon Fiber Reinforced Magnesium Composites", Euromat 99, Muenchen, 1999, im Druck

 

C. Koerner, R. F. Singer, "Processing of Metal Foams - Challenges and Opportunities", Advanced Engineering Materials, 4/2000

 

C. Koerner, R. F. Singer, "Numerical Simulation of Foam Formation and Evolution with Modified Cellular Automata", J. Banhart, M. F. Ashby, N. A. Gleck (Eds.), Metal Foams and Porous Metal Structures, MIT-Verlag, Bremen, 1999, 91-96

 

W. Schaeff, M. Hagenbruch, C. Koerner, R. F. Singer, "Fabrication Process for Continuous Magnesium/Carbon-Fibre Composites with Graded Fibre Content", Proceedings of 5th International Symposium on Functionally Graded Materials, 1998

 

W. Schaeff, F. Heinrich, C. Koerner, R. F. Singer, "Thermal Fatigue of Locally Fiber Reinforced Magnesium with Graded Structure", ICCM-12, Paris, Frankreich, 1999

 

zurück zur Personenübersicht

zum Seitenanfang Seitenanfang

Letzte Änderung am 29.02.2016